Seamless Floor · Westland

Seamless Floor in Westland
seamless, in your colour, for years.

We work throughout Westland — Naaldwijk, Wateringen, Honselersdijk, 's-Gravenzande, Monster, Poeldijk, De Lier and Kwintsheul. From our showroom in The Hague-Ypenburg, Naaldwijk is a 15-minute drive. Two product lines: microcement for walls & furniture, Lavasteen Seamless Floor for floors in wet rooms and living rooms.

Westland projects

What we do here — by Westland village

Naaldwijk, Honselersdijk & Wateringen — town centres

In the larger Westland villages, primarily renovation work in 1980s/90s homes and new-builds from the past 15 years. Here we often install complete bathrooms and living rooms: microcement on walls in Pearl, Sand or Cement, Lavasteen seamless floor on the floor. In new-build estates almost always anhydrite with underfloor heating — our finish conducts heat quickly.

's-Gravenzande, Monster & Ter Heijde — coastal influence

The western Westland towns lie 1–2 km from the North Sea. Higher humidity in bathrooms and salt influence on exteriors means: we consistently recommend 3 layers of PU topcoat instead of the standard 2. For beach villas and holiday homes we also choose Lavasteen seamless floor in the living room — epoxy is inherently moisture-resistant.

Poeldijk, Kwintsheul & De Lier — smaller village centres

In the smaller centres, primarily detached houses and semi-detached properties with various floor constructions. We always check beforehand: old concrete floors with cracks, sand-cement or modern anhydrite. For properties directly beside greenhouses we watch for temperature fluctuations that can affect the subfloor — usually not a problem, but something to factor into the design.

New-build around Maasdijk & Hoogeland — anhydrite and underfloor heating

On the north side and in new-build projects, almost always anhydrite screed — an ideal substrate. Important: anhydrite must be completely dry (moisture content ≤0.5%) before we apply. With new-builds we often visit at an early stage to measure and coordinate planning with the contractor.

Farmhouses, old growers' cottages & agricultural renovations

Characteristic of Westland: agricultural dwellings, farmhouse renovations and homes directly beside horticultural businesses. Here we often find old tiled floors, sometimes with moisture from the ground. We measure beforehand and, if in doubt, install a vapour barrier beneath the seamless floor. For show kitchens of growers we build a sleek finish that suits the modern appearance of commercial spaces.

Two product lines

Which suits your Westland project?

Microcement wand in een Westlandse badkamer
01 — Microcement

Microcement for walls, furniture & stairs

Mineral, matte-minimalist, 36 standard colours plus NCS & RAL. For renovations in Naaldwijk town centre to modern new-builds in Hoogeland — 1–2 mm thin, applied directly over existing substrates.

More about microcement →

Lavasteen-gietvloer in een Westlandse douche
02 — Lavasteen Seamless Floor

Lavasteen Seamless Floor for floors in wet rooms

Epoxy-based with fine quartz. Inherently waterproof. Ideal for shower floors near the coast ('s-Gravenzande, Monster) and living rooms in new-builds with underfloor heating.

More about Lavasteen Seamless Floor →

Service area

Westland & surrounding areas

From our showroom at Laan van 's-Gravenmade 42L (Ypenburg), Naaldwijk is a 15-minute drive, 's-Gravenzande and Monster 25 minutes. No-obligation home visit for measurement and advice.

Villages in Westland

Naaldwijk, Wateringen, Honselersdijk, 's-Gravenzande, Monster, Poeldijk, De Lier, Kwintsheul, Maasdijk, Ter Heijde and Hoek van Holland-east.

Directly surrounding towns

We regularly work in The Hague-Loosduinen, Delft-Harnaschpolder, Rijswijk-Hoekpolder, Maassluis and Vlaardingen. For projects within 20 km of Naaldwijk there is no travel surcharge.

Wider region

For larger projects (from approximately 25 m²) we also cover Hoek van Holland, Pernis, Schiedam and Spijkenisse.

Working method

How does a Westland project work?

  1. Consultation — at your home (free throughout Westland) or at our showroom in Ypenburg. For properties directly adjacent to greenhouses or agricultural areas, we measure moisture content beforehand.
  2. Colour samples — order up to 3 free samples. For coastal areas ('s-Gravenzande, Monster), testing samples in your own light is especially important — the coastal region has brighter light incidence.
  3. Tailored quotation — within 1 working day.
  4. Preparation — primer, levelling if required. For farmhouses or older growers' cottages, sometimes a vapour barrier against ground moisture.
  5. Application — 2 base coats + finish coat + PU topcoat (standard 2 layers, 3 for coastal areas). Touch-dry within 24 hours, fully cured in 7 days.
  6. Handover — walk-through together, maintenance tips, warranty information.
Frequently asked — Westland questions

Questions we often hear in Westland

How much does a seamless floor cost in Westland?

DIY kits start at € 155 per 5 m² bucket of microcement, € 235 for Lavasteen Seamless Floor. For professional installation: € 90–150 per m² depending on substrate, colour and surface area. Throughout Westland we charge no travel surcharge.

Is a seamless floor suitable for homes directly adjacent to greenhouses?

Yes, provided we thoroughly inspect the subfloor beforehand. Greenhouses produce heat and moisture fluctuations that can affect the adjoining dwelling. We measure moisture content, check for cracks in the screed, and use an elastic primer where there is increased risk of movement.

Do you also work in agricultural business premises and showroom kitchens?

Yes, we regularly create sleek finishes in growers' showroom kitchens and in business premises with a representative character. Lavasteen Seamless Floor is excellent for commercial applications due to its wear resistance and chemical resistance.

How long does a Westland renovation project take?

For a bathroom (5–10 m²): 3–4 working days incl. drying time. For a living room (25–40 m²): 4–5 working days. For detached houses with large surface areas this can be 1 week or more.

Do you come to Monster, 's-Gravenzande and Ter Heijde?

Yes, throughout Westland without travel surcharge. For the coastal area we do consistently recommend 3 layers of PU topcoat instead of the standard 2 — due to higher air humidity and salt influence.

Can I visit the showroom from Westland?

Yes, from Naaldwijk it is a 15-minute drive via N211/A4. Our showroom in Ypenburg is open daily 09:00–17:00 by appointment. Call +31 (0)85 027 0090.

Ready for your Westland project?

Call +31 (0)85 027 0090 directly, request free colour samples, or submit your project to us for a bespoke quotation — within 1 working day.

Back to Top

Search For Products

Product has been added to your cart