Seamless Floor in Pijnacker-Nootdorp
seamless, in your colour, for years.
Our showroom in The Hague-Ypenburg is a 10-minute drive from Pijnacker and Nootdorp. We work in both villages plus the expansion districts Tolhek, Klapwijk, Ackerswoude and Delfgauw. Two product lines: microcement for walls & furniture, Lavasteen Seamless Floor for floors in wet rooms and living rooms.
What we do here — by district
Oud-Pijnacker & Nootdorp-Centrum — characteristic village centres
In the old village centres we find a mix of pre-war and 1950s/60s dwellings. Often concrete or sand-cement subfloors. We always check moisture content and, where necessary, carry out local repairs. For bathroom renovations in village houses we often work in compact spaces (5–7 m²) where tile build-up consumes precious millimetres.
Klapwijk, Tolhek & Ackerswoude — new-build 2000+
The large Pijnacker expansion districts from the past 20 years. Here almost exclusively anhydrite screed with low-temperature underfloor heating. Our 1–2 mm thin build-up conducts heat rapidly. Many complete renovations of recently delivered new-build bathrooms to personal taste: Pearl, Sand, Linnen, Mushroom.
Koningshof & Hoge Noot — 1980s terraced houses
In the first expansion rings from the 1980s, mainly terraced houses with cement screed. Here we often carry out phased renovations: first the bathroom (year 1), then the living room (year 2). We ensure colour and style consistency by staying within one colour family.
Delfgauw & Pijnacker-Zuid — new-build towards Delft
The southern expansion area towards Delft. Here new-build with modern anhydrite. We often visit at an early stage for moisture measurement; with new-build handovers we measure directly after transfer and schedule our finishing prior to the moving date.
Working area nearby — advantage of our showroom proximity
Pijnacker-Nootdorp lies directly adjacent to our showroom in Ypenburg. This means: rapid site visits for measurement (often within 2–3 working days), short communication lines during execution, and no travel surcharge for projects throughout the municipality.
Which suits your project in Pijnacker or Nootdorp?
Microcement for walls, furniture & stairs
Mineral, matte-minimalist, 36 standard colours plus NCS & RAL. From characterful village homes to sleek Ackerswoude new-builds — 1–2 mm thin, applied directly over existing substrates.
Lavasteen Seamless Floor for floors in wet rooms
Epoxy-based with fine quartz. Inherently waterproof. Ideal in combination with low-temperature underfloor heating in new-build properties.
Pijnacker-Nootdorp & surrounding areas
From our showroom at Laan van ‘s-Gravenmade 42L (Ypenburg), Pijnacker and Nootdorp are a 10-minute drive. No-obligation home visit for measurement and advice.
Neighbourhoods in Pijnacker-Nootdorp
Pijnacker-Centrum, Nootdorp-Centrum, Klapwijk, Tolhek, Ackerswoude, Koningshof, Hoge Noot, Delfgauw, Pijnacker-Zuid, Oude Leede and Heron.
Directly surrounding towns
We regularly work in The Hague, Delft, Zoetermeer, Berkel en Rodenrijs, Bergschenhoek and Bleiswijk. No travel surcharge for projects in these locations.
Wider region
For larger projects (from approximately 25 m² onwards), we also cover Rotterdam-north, Schiedam, Waddinxveen and Alphen aan den Rijn.
How does a project in Pijnacker or Nootdorp work?
- Consultation — at your home (free throughout Pijnacker-Nootdorp) or at our showroom in Ypenburg, a 10-minute drive.
- Colour samples — order up to 3 free samples to evaluate in your own lighting conditions.
- Tailored quotation — within 1 working day.
- Preparation — primer, levelling if required. For new-builds, moisture measurement on anhydrite screed beforehand (≤0.5%).
- Application — 2 base coats + finish coat + PU topcoat. Touch-dry within 24 hours, fully cured in 7 days.
- Handover — walk-through together, maintenance tips, warranty information.
Questions we often hear in Pijnacker and Nootdorp
How much does a seamless floor cost in Pijnacker-Nootdorp?
DIY kits start at € 155 per 5 m² tub of microcement, € 235 for Lavasteen Seamless Floor. For professional installation: € 90–150 per m² depending on substrate, colour and surface area. No travel surcharge.
Do you also work in new-build developments such as Ackerswoude or Tolhek?
Yes, regularly. For new-build deliveries we measure the moisture content of the anhydrite screed directly after handover (must be ≤0.5%). This allows us to schedule our finishing work so that it is completed before the move-in date.
Is a seamless floor a good choice for characterful village homes?
Absolutely. In older properties in Pijnacker or Nootdorp town centre, we often work over existing tiles (no demolition, no noise). Compact spaces benefit from our 1–2 mm thin build-up — no loss of ceiling height or circulation space.
How long does a Pijnacker bathroom project take?
For a bathroom (5–10 m²): 3–4 working days including drying time. For phased renovations (bathroom in year 1, living room in year 2), we ensure colour and style consistency within a single colour family.
Do you work with Pijnacker contractors?
Yes, we coordinate with plumbers, tilers and contractors throughout Pijnacker-Nootdorp. For complete renovations, we align our schedule with other tradespeople to minimise downtime.
Can I collect colour samples from Pijnacker?
Yes, our showroom in Ypenburg is a 10-minute drive away. Open daily 09:00–17:00 by appointment. Call +31 (0)85 027 0090.
Ready for your Pijnacker-Nootdorp project?
Call +31 (0)85 027 0090 directly, request free colour samples, or submit your project to us for a bespoke quotation — within 1 working day.