Lavasteen Wool

Lavasteen Seamless Floor & wall – Wool concrete look

What makes a finish truly valuable? With Lavasteen Seamless Floor in the colour Wool, it's about artisan perfection, daily comfort and durability. The combination of epoxy and carefully selected lava stone crystals delivers a surface that is seamless, fully waterproof and highly scratch-resistant.

Wool is a soft, off-white neutral that brings light and tranquillity. Wood, light natural stone and matte black accents combine harmoniously. Wool visually enlarges the space. By distributing the material manually with a trowel, you can choose a sleek minimalist or subtly vibrant concrete look.

Characteristic properties of half-timbering

• Masterful waterproofing – seamless and reliable in bathroom and shower; even with localised topcoat damage, the underlayer remains watertight.
• Craftsmanship without boundaries – one continuous surface without joints; hygienic and quick to clean.
• Robust perfection – lava stone-reinforced for high scratch resistance; suitable for residential, hospitality and office spaces with intensive use.
• Thin layer & underfloor heating – efficient heat transfer; ideal for new builds and renovations.
• Natural finish – stains do not penetrate; cleaning can be done with mild agents.
• Timeless maintenance – minimal care and long lifespan.
• Respectful renovation – adheres to concrete, cement, tiles (with primer), plaster, wood and MDF.

Passing on the craft, learning the trade

True quality begins with preparation. Our guide shows step by step how to apply Wool professionally.

Working over tiles? Level the joints and the entire tile surface with Stucopaste and use primer for optimal adhesion. This way you lay the right foundation. If you want to understand the principles of seamless floors, read the blog What is a seamless floor?.

What's included in the package?

• Lavasteen Seamless Floor mix in Wool (7.15 kg – A and B components, pre-weighed mixing ratio).
• Optional: primer and PU topcoat for additional protection and extended lifespan.

How to Apply Wool Neatly Yourself

You don't need to be a professional to achieve expert results. With the instructions, you'll succeed step by step. Follow these key steps:

1. Prepare the substrate – stable, clean and level; use primer where necessary for optimal adhesion.
2. Mixing – stir component A until homogeneous; add the weighed component B and mix for 2–3 minutes.
3. Layer 1 – apply thinly and tightly with the trowel; remove tape; allow to dry for at least 24 hours.
4. Layer 2 – choose tight or subtly lively; lightly mist and distribute the "slip coat" with a flexible trowel for extra nuance.
5. Curing & sanding – approx. 24 hours curing time; sand with grit 80 (short = anti-slip, longer = smoother result).
6. PU topcoat – prevents yellowing, increases protection and makes maintenance easy.

Professional guidance

Questions about your project? Our specialists are here to advise – from colour selection to application. Contact us via our contact page for tailored advice.

Our tradition: honest advice, traditional craftsmanship and guidance towards a Wool finish you will enjoy for years to come.